WiFi Extenders & RM Noise Packet Loss

Users help users
Post Reply
mm0opx
Posts: 7
Joined: Tue Dec 19, 2023 10:51 am

WiFi Extenders & RM Noise Packet Loss

Post by mm0opx »

Hi All,

I have discovered my cheap TP Link WiFi extender causes regular packet loss. Initlalty I thought it was due to seeing the server status "degraded" but then I upgraded RM noise and connected to the HB9 server and it was still there. Managed to then connect direct to the router via WiFi and the issue was gone.

Just an FYI if anyone notices regular spaced packet drops.

Colin
MM0OPX
User avatar
HB9VQQ
Site Admin
Posts: 67
Joined: Thu Dec 07, 2023 11:18 am
Location: Switzerland
Contact:

Re: WiFi Extenders & RM Noise Packet Loss

Post by HB9VQQ »

Thanks for sharing Colin! I hope you enjoy the holidays, merry Xmas!

Roland
mm0opx
Posts: 7
Joined: Tue Dec 19, 2023 10:51 am

Re: WiFi Extenders & RM Noise Packet Loss

Post by mm0opx »

Thanks Roland,

So the packet drop out is still there! It was definitely gone before. I have now tethered the PC to my mobile phones WiFi hotspot and its perfect.

Something with broadband router / service is causing the packet dropout. Its almost exactly 30 seconds apart each dropout, like clockwork

Colin
User avatar
HB9VQQ
Site Admin
Posts: 67
Joined: Thu Dec 07, 2023 11:18 am
Location: Switzerland
Contact:

Re: WiFi Extenders & RM Noise Packet Loss

Post by HB9VQQ »

Colin,

if you want to hunt the source of the packet loss you can use https://www.pingplotter.com/download/ and measure packet loss to rmnoise3.rmnoise.com and any other IP along the path like your ISP gateway for example.

Roland
mm0opx
Posts: 7
Joined: Tue Dec 19, 2023 10:51 am

Re: WiFi Extenders & RM Noise Packet Loss

Post by mm0opx »

Thanks Roland.

Will give it a go over the holidays as need this resolved.

Colin
mm0opx
Posts: 7
Joined: Tue Dec 19, 2023 10:51 am

RM Noise Packet Loss - SOLVED

Post by mm0opx »

Issue now solved.

Long story short, I had to disable "Roaming Agressiveness" on my network adaptor. Zero loss since making this change.

Colin
Post Reply