RandyW
Could be an issue with Australia connecting to the server
Oh well thanks for trying
Andrew
New install - no AI filters
Re: New install - no AI filters
Andrew,
I did the packet trace on my own system and the results surprised me.
Nslookup used the DNS server from DHCP:
192.168.12.186.50664 > 192.168.12.1.domain: 2+ TXT? servers.rmnoise.com. (37)
RM Noise used google's DNS server:
192.168.12.186.57435 > dns.google.domain: 44470+ TXT? servers.rmnoise.com. (37)
I do not yet know why RM Noise is using google's DNS. The documentation doesn't show it as the default. I tried forcing dns on the interface (instead of using DHCP), but that didn't change RM Noise.
What do you get when run this command:
Randy
I did the packet trace on my own system and the results surprised me.
Nslookup used the DNS server from DHCP:
192.168.12.186.50664 > 192.168.12.1.domain: 2+ TXT? servers.rmnoise.com. (37)
RM Noise used google's DNS server:
192.168.12.186.57435 > dns.google.domain: 44470+ TXT? servers.rmnoise.com. (37)
I do not yet know why RM Noise is using google's DNS. The documentation doesn't show it as the default. I tried forcing dns on the interface (instead of using DHCP), but that didn't change RM Noise.
What do you get when run this command:
Code: Select all
nslookup -type=txt servers.rmnoise.com 8.8.8.8
Re: New install - no AI filters
I see an IPv6 Domain Name Server address. Maybe related? Can the client handle IPv6 addresses?
Re: New install - no AI filters
All of the resolved IPs are IPv4, so the client shouldn't receive any IPv6 addresses. With that said, I think the client can handle IPv6 servers, but I have not tested it.
Re: New install - no AI filters
Look at the Server address, it's IPv6. I have seen other software failing to resolve hostnames when the server was an IPv6 address. I assume the client uses the DNS from the Hosts IP stack?
Would be interesting to know if VK3DMA is using an IPv4 or IPv6 Domain Name Server address.
Would be interesting to know if VK3DMA is using an IPv4 or IPv6 Domain Name Server address.
Re: New install - no AI filters
I saw the DNS server was IPv6 but was guessing that would be abstracted from RM Noise. RM Noise does have its own resolution library, so maybe not...HB9VQQ wrote: ↑Sat Apr 27, 2024 2:55 pm Look at the Server address, it's IPv6. I have seen other software failing to resolve hostnames when the server was an IPv6 address. I assume the client uses the DNS from the Hosts IP stack?
Would be interesting to know if VK3DMA is using an IPv4 or IPv6 Domain Name Server address.
Re: New install - no AI filters
I was curious to see what DNS Server the client uses to resolve the rmnoise.com hostnames. My Notebook has IP 192.168.1.205 and the DNS Server is assigned by DHCP. The assigned DNS Server is 192.168.1.254. I captured the DNS traffic with Wireshark and started the RMN client software. The RMN client uses the DNS Server assigned by DHCP.
Everything works as expected. Too bad I cannot test with an IPv6 address.
Everything works as expected. Too bad I cannot test with an IPv6 address.
- Attachments
-
- DNS.png (94.46 KiB) Viewed 2873 times
Re: New install - no AI filters
Thank you. It appears my 8.8.8.8 resolution may be a red herring.
@VK2ASG & VK3DMA:
A temporary solution may be to manually configure IPv4 DNS servers, while I find a way to test an IPv6 DNS server.
Re: New install - no AI filters
RandyW
This is the screen shot for
nslookup -type=txt servers.rmnoise.com 8.8.8.8
This is the screen shot for
nslookup -type=txt servers.rmnoise.com 8.8.8.8
Re: New install - no AI filters
I'm not sure what to make of that output. That reply didn't come from google, so it appears DNS is being intercepted.
Here is the output from my PC using google's dns:
C:\Users\randy>nslookup -type=txt servers.rmnoise.com 8.8.8.8
Server: dns.google
Address: 8.8.8.8
Non-authoritative answer:
servers.rmnoise.com text =
"rmnoise1.rmnoise.com:11109,rmnoise2.rmnoise.com:11109,rmnoise3.rmnoise.com:11109"
Here it is using quad9:
C:\Users\randy>nslookup -type=txt servers.rmnoise.com 9.9.9.9
Server: dns9.quad9.net
Address: 9.9.9.9
Non-authoritative answer:
servers.rmnoise.com text =
"rmnoise1.rmnoise.com:11109,rmnoise2.rmnoise.com:11109,rmnoise3.rmnoise.com:11109"
Here is the output from my PC using google's dns:
C:\Users\randy>nslookup -type=txt servers.rmnoise.com 8.8.8.8
Server: dns.google
Address: 8.8.8.8
Non-authoritative answer:
servers.rmnoise.com text =
"rmnoise1.rmnoise.com:11109,rmnoise2.rmnoise.com:11109,rmnoise3.rmnoise.com:11109"
Here it is using quad9:
C:\Users\randy>nslookup -type=txt servers.rmnoise.com 9.9.9.9
Server: dns9.quad9.net
Address: 9.9.9.9
Non-authoritative answer:
servers.rmnoise.com text =
"rmnoise1.rmnoise.com:11109,rmnoise2.rmnoise.com:11109,rmnoise3.rmnoise.com:11109"